Oil-Water Seperator
Equipment principle
The oil-water separator is a specialized device for collecting waste oils and fats discharged through kitchen drainage. Sewage enters the solid-liquid separation chamber via the inlet of the oil-water separator. Larger solid impurities in the sewage are intercepted by the screen mesh and then lifted to the collection bin by the screw conveyor. A sedimentation hopper is set at the bottom of the solid-liquid separation area. Sewage free of solids and impurities flows out of the outlet of the solid-liquid separation zone into the oil-water separation chamber. Inside the oil-water separation chamber, due to the different densities of oil and water, the oil floats on top of the separation zone. The still water at the bottom of the oil-water separation chamber is discharged into the temporary sewage storage tank through the outlet pipe. An oil discharge port is set above the oil-water separation chamber, and oil is periodically discharged based on its quantity. The oil-separated sewage then enters the temporary sewage storage tank and is pumped into the municipal sewer network.
equipment characteristics
1. Fully sealed stainless steel structure, no odor;
2. Double layer filtration, efficient slag removal, oil removal;
3. Intelligent control, automatic operation;
4. Easy to install and maintain;
5. The oil separator is equipped with stirring and heating functions to prevent the oil from sticking and standing still in winter;
6. It is equipped with a time control switch, which can flexibly control the start and stop of the equipment according to the working time of the kitchen, so as to save more energy;
7. Equipped with automatic lifting slag removal device to achieve automatic slag removal without blockage.
Equipment model and parameters
Model |
Size (mm) |
Water treatment capacity (L/S) |
Power (kw) |
Reference price (YUAN) |
KQ-KG-GYQ-10 |
2400*1200*1700 |
3 |
6.0 |
83000 |
KQ-KG-GYQ-15 |
2600*1200*1800 |
4 |
6.0 |
89500 |
KQ-KG-GYQ-20 |
2600*1200*1800 |
6 |
7.0 |
103500 |
KQ-KG-GYQ-25 |
2700*1200*1900 |
7 |
7.0 |
119500 |
KQ-KG-GYQ-30 |
2900*1200*2000 |
8 |
8.0 |
123000 |
KQ-KG-GYQ-35 |
3100*1200*2000 |
10 |
9.0 |
128500 |
KQ-KG-GYQ-40 |
3300*1200*2000 |
11 |
11.0 |
133000 |
KQ-KG-GYQ-45 |
3300*1400*2000 |
13 |
13.0 |
137500 |
KQ-KG-GYQ-50 |
3500*1400*2000 |
14 |
16.0 |
142000 |
Installation requirements
1. The oil-water separator should be installed at the end of the whole kitchen drain. Before installation, the height of the existing drain pipe (oil-water separator inlet pipe) should be confirmed;
2. The oil and water separator shall be installed horizontally and discharged from the kitchen floor. If it is in the same floor, sewage lifting device shall be added;
3. Power supply: AC 380V (3P+N+PE)
4. Fill the water inlet above the oil and water separation tank with water before installation and debugging.